# KiBot output for generating Fabrication Document in PDF format
# https://kibot.readthedocs.io/en/latest/configuration/outputs/pcb_print.html

kibot:
  version: 1

outputs:
- name: @NAME@
  comment: '@COMMENT@'
  type: pcb_print
  category: '@DIR@'
  dir: '@DIR@'
  options:
    colored_pads: false
    colored_vias: false
    color_theme: '@COLOR_THEME@'
    output: '%f-fabrication%I%v.%x'
    format: 'PDF'
    title: '@DOC_TITLE@ Document'
    realistic_solder_mask: false
    dpi: 1200
    dnf_filter: _kibom_dnf_Config
    frame_plot_mechanism: 'internal' 
    sheet_reference_layout: '@SHEET_WKS@'
    drill:
      unify_pth_and_npth: '@PTH_NPTH@'
      group_slots_and_round_holes: @GROUP_ROUND_SLOTS@
    include_table:
      outputs:
        - name: '@NAME_TP_TOP@'
          text_alignment: 'left'
          invert_columns_order: false
          border_width: 0.4
          header_rule_width: 0.2
          horizontal_rule_width: 0
          vertical_rule_width: 0.2
          top_rule_width: 0.2
          bottom_rule_width: 0.2
          column_spacing: 2
          force_font_width: 1.27 # mm
        - name: '@NAME_TP_BOTTOM@'
          text_alignment: 'right'
          invert_columns_order: true
          border_width: 0.4
          header_rule_width: 0.2
          horizontal_rule_width: 0
          vertical_rule_width: 0.2
          top_rule_width: 0.2
          bottom_rule_width: 0.2
          column_spacing: 2
          force_font_width: 1.27 # mm
        - name: '@NAME_IMPEDANCE_TABLE@'
          text_alignment: 'left'
          invert_columns_order: false
          border_width: 0.4
          header_rule_width: 0.2
          horizontal_rule_width: 0
          vertical_rule_width: 0.2
          top_rule_width: 0.2
          bottom_rule_width: 0.2
          row_spacing: 3
          column_spacing: 2
          row_spacing: 3
        - name: '@NAME_DRILL_TABLE@'
          text_alignment: 'left'
          invert_columns_order: false
          border_width: 0.4
          header_rule_width: 0.2
          horizontal_rule_width: 0
          vertical_rule_width: 0.2
          top_rule_width: 0.2
          bottom_rule_width: 0.2
          row_spacing: 3
          column_spacing: 2
          force_font_width: 1 # mm

    pages:
      - scaling: @SCALING@
        title: '@DOC_TITLE@'
        sheet: 'Top Fabrication (Scale @SCALING@:1)'
        layer_var: 'Top Fabrication (Scale @SCALING@:1)'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        layers:
          - layer: Edge.Cuts
            color: '#000000'
          - layer: F.Cu
            color: '#F2F2F2'
          - layer: F.Mask
            color: '#E2E2E2'
          - layer: F.Paste
            color: '#E2E2E2'
          - layer: F.Silkscreen
            color: '#DBDBDB'
          - layer: F.Fab
            plot_footprint_refs: false
            plot_footprint_values: false
            color: '#818181'
          - layer: F.Dimensions
            color: '#000000'

      - scaling: @SCALING@
        mirror: true
        mirror_pcb_text: false
        title: '@DOC_TITLE@'
        sheet: 'Bottom Fabrication (Scale @SCALING@:1)'
        layer_var: 'Bottom Fabrication (Scale @SCALING@:1)'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        layers:
          - layer: Edge.Cuts
            color: '#000000'
          - layer: B.Cu
            color: '#F2F2F2'
          - layer: B.Mask
            color: '#E2E2E2'
          - layer: B.Paste
            color: '#E2E2E2'
          - layer: B.Silkscreen
            color: '#DBDBDB'
          - layer: B.Fab
            plot_footprint_refs: false
            plot_footprint_values: false
            color: '#818181'
          - layer: B.Dimensions
            color: '#000000'

      - scaling: @SCALING@
        title: '@DOC_TITLE@'
        sheet: 'Drill Drawing (%lp)'
        layer_var: 'Drill Drawing %lp (Scale @SCALING@:1)'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        repeat_for_layer: '@LAYER_DRILL_MAP@'
        repeat_layers: 'drill_pairs'
        layers:
          - layer: '@LAYER_DRILL_MAP@'
            color: '#000000'
          - layer: 'Edge.Cuts'
            color: '#000000'

      - scaling: @SCALING@
        title: '@DOC_TITLE@'
        sheet: 'Top Test Points (Scale @SCALING@:1)'
        layer_var: 'Top Test Points (Scale @SCALING@:1)'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        layers:
          - layer: Edge.Cuts
            color: '#000000'
          - layer: F.Cu
            color: '#E5E5E5'
          - layer: F.Mask
            color: '#CECECE'
          - layer: F.Paste
            color: '#CECECE'
          - layer: F.Silkscreen
            color: '#C7C7C7'
          - layer: F.Fab
            exclude_filter: '@FAB_EXCLUDE_FILTER@'
            plot_footprint_values: false
            sketch_pads_on_fab_layers: false
            color: '#E10000'
          - layer: '@LAYER_TP_LIST_TOP@'
            color: '#000000'

      - scaling: @SCALING@
        mirror : true
        mirror_pcb_text: true
        title: '@DOC_TITLE@'
        sheet: 'Bottom Test Points (Scale @SCALING@:1)'
        layer_var: 'Bottom Test Points (Scale @SCALING@:1)'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        layers:
          - layer: Edge.Cuts
            color: '#000000'
          - layer: B.Cu
            color: '#E5E5E5'
          - layer: B.Mask
            color: '#CECECE'
          - layer: B.Paste
            color: '#CECECE'
          - layer: B.Silkscreen
            color: '#C7C7C7'
          - layer: B.Fab
            exclude_filter: '@FAB_EXCLUDE_FILTER@'
            plot_footprint_values: false
            sketch_pads_on_fab_layers: false
            color: '#0B00CC'
          - layer: '@LAYER_TP_LIST_BOTTOM@'
            color: '#000000'

      - scaling: @SCALING@
        sheet: '%ln (Scale @SCALING@:1)'
        layer_var: '%ln (Scale @SCALING@:1)'
        title: '@DOC_TITLE@'
        sheet_reference_color: '#000000'
        colored_holes: true
        holes_color: "#FFFFFF"
        repeat_for_layer: 'F.Cu'
        repeat_layers: 'copper'
        layers:
          - layer: 'F.Cu'

...
definitions:
  NAME: pdf_fabrication
  COMMENT: Fabrication document in PDF format
  DIR: Manufacturing/Fabrication
  DOC_TITLE: Fabrication
  COLOR_THEME: Altium_Theme
  SHEET_WKS: ${KIPRJMOD}/Templates/KDT_Template_PCB_GIT_A4.kicad_wks
  SCALING: 1.0
  FAB_EXCLUDE_FILTER: only_testpoints
  LAYER_DRILL_MAP: DrillMap
  LAYER_TP_LIST_TOP: F.TestPointList
  LAYER_TP_LIST_BOTTOM: B.TestPointList
  PTH_NPTH: 'yes'
  GROUP_ROUND_SLOTS: true 
  NAME_TP_TOP: csv_testpoints_top
  NAME_TP_BOTTOM: csv_testpoints_bottom
  NAME_IMPEDANCE_TABLE: csv_impedance_table
  NAME_DRILL_TABLE: csv_drill_table